Nuvie
NUVIE Ember Dual Pro Ice Bath & Hot Tub
NUVIE Ember Dual Pro Ice Bath & Hot Tub
- Regular price
- Price: $9,990.00
- Regular price
- List Price: $0.00
- Sale price
- Price: $9,990.00
- Unit price
- per
Couldn't load pickup availability
Complimentary expert guidance
Get advice on this product
🛡️ Protected by manufacturer warranty — real support from a real person, not a call centre
-
Authorised Retailer
-
Premium Warranty
-
Ships Australia-wide
-
Free Expert Consultation
PRODUCT DESCRIPTION
NUVIE Ember Dual Pro Commercial Ice Bath & Hot Tub
The NUVIE Ember Dual Pro combines the larger two-person bath format with a 2HP commercial heating and cooling system. It is built for facilities and demanding home environments that need more bathing room, frequent use and stronger temperature recovery.
Best for: commercial wellness studios, gyms, sporting environments, shared recovery spaces and premium homes expecting frequent use.
Why choose the Ember Dual Pro?
- Larger-format immersion: approximately 600L total capacity and 400L usable volume.
- 2HP commercial system: stronger cooling and heating capacity for frequent sessions.
- Cold and hot capability: selectable temperature range from 3°C to 42°C.
- Commercial-minded construction: insulated 316 marine-grade stainless steel with Western Red Cedar casing.
- Managed water care: integrated ozonation, particle filtration and app control.
What is included?
- NUVIE Ember Dual Pro bath
- 2HP reverse-cycle commercial chiller
- Hydro-Crystal Ozonator™
- Precision Particle Filter plus 2 replacement filters
- Insulated weather-shield bath cover
- Required connection hoses and fittings supplied with the system
Specifications
| Water temperature setting | 3°C–42°C; actual performance depends on ambient conditions and use |
|---|---|
| Inner bath | Insulated 316 marine-grade stainless steel |
| Exterior | Western Red Cedar with stainless steel hoops and fasteners |
| Cover | Insulated polyester cover |
| Electrical supply | 220–240 V; dedicated 15 A outlet |
| Control and water treatment | WiFi app control, particle filtration and ozone system |
| Water volume | 600 L total; approximately 400 L usable |
| Site dimensions | Request the current production drawing before preparing a fitted base or access route |
Exact internal bath measurements and electrical requirements should be confirmed with NORD SAUNAS before construction or site services are finalised.
Simple installation, clear planning
The system does not require permanent plumbing. Fill it manually with a hose and use the built-in drainage system when required. Place the bath on a flat, stable, load-bearing surface and allow space for the separate chiller, hoses, ventilation and service access. For outdoor installations, keep the chiller protected from direct weather exposure.
Availability: Confirm your selected configuration and delivery timing with NORD SAUNAS before ordering.
Planning a commercial installation?
Call 1800 800 221 or request expert advice. We will help review expected usage, access, placement, drainage, electrical preparation and delivery before the order is placed.
Placement, water care and warranty conditions
Keep the chiller fully protected from rain and other weather, with unobstructed ventilation. Maintain sealed timber finishes, balanced water chemistry, clean filters and clear air intakes. Use a stable, level base rated for the filled tub and occupants. Filtration and ozone do not replace water testing, cleaning and the prescribed sanitising routine. Follow the manual’s electrical requirements; the warranty excludes extension cords, timers and non-approved surge protectors.
Manufacturer warranty
Residential: tub 3 years; chiller internal components and plumbing components 2 years; labour 1 year. Commercial or shared use: tub and chiller internal components 1 year; plumbing components and labour 6 months. These manufacturer warranties are additional to your rights under Australian Consumer Law. Contact NORD SAUNAS with your order number, serial number and photos for help with a claim.
Frequently Asked Questions
Do I need an electrician to install a sauna?
Yes — all electric saunas require a dedicated hardwired circuit installed by a licensed electrician. You will need a minimum 32A circuit breaker (we recommend 40A) with an RCD safety switch. This is a straightforward job for any qualified sparky and typically takes 2–3 hours. We will send you the full electrical specifications sheet before delivery so you can brief your electrician in advance.
How long does delivery take?
Delivery timeframes vary by product and your location. Australian metro areas typically receive delivery within 3–10 business days from order confirmation. Regional and rural areas may take longer. Your estimated arrival date is shown on the product page and confirmed in your order confirmation email. We will send you tracking information as soon as your order ships.
How is it delivered?
Your sauna or cold plunge is delivered by a professional freight carrier directly from the supplier's Australian warehouse. Delivery is to your kerb or garage — it does not include carry-in, assembly, or installation. We recommend having 2–3 people available on delivery day to assist with moving the flat-pack components to your installation location.
What base does it need — concrete, pavers, or a deck?
Your sauna needs a firm, level, waterproof base. Concrete slabs, pavers on compacted base, and structurally sound elevated timber decks all work well. The base must be perfectly level — even a slight slope affects door alignment and long-term structural integrity. We recommend checking with a builder or landscaper if you are unsure about your surface before ordering.
Do you offer installation services?
Professional assembly can be arranged for many of our products and delivery locations through our supplier and installer network. Availability and pricing depend on the selected model, postcode, site access, base preparation and installation conditions.
NORD SAUNAS can coordinate product selection, technical documentation, delivery and, where available, professional assembly. Licensed electrical, plumbing and site-preparation work must be completed separately by appropriately qualified local trades.
Contact us with your postcode and photographs of the proposed location for a delivered and assembled project quotation.
What is your return policy?
Due to the size and nature of these products, returns are assessed case by case. If a product arrives damaged or is not as described, we will work with you and the supplier to arrange a replacement or resolution at no cost to you. For change of mind returns, please contact us within 7 days of delivery. Return freight costs apply and products must be unassembled and in original packaging.
