Skip to product information

Nuvie

NUVIE Ember Ice Bath & Hot Tub (Black)

NUVIE Ember Ice Bath & Hot Tub (Black)

Official Saunas RetailerBuilt for the extraordinary
Regular price
Price: $7,890.00
Regular price
List Price:
Sale price
Price: $7,890.00
View Cart
Not sure this is right for your space? Get personalised guidance on sizing, installation and product selection.

🛡️ Protected by manufacturer warranty — real support from a real person, not a call centre

  • Image of  trustbadges Authorised Retailer
  • Image of  trustbadges Premium Warranty
  • Image of  trustbadges Ships Australia-wide
  • Image of  trustbadges Free Expert Consultation
NUVIE Ember Ice Bath & Hot Tub

Move from a controlled cold plunge to a warm soak in the same premium system. The NUVIE Ember pairs a thermally insulated 316 marine-grade stainless-steel bath with a 1HP reverse-cycle chiller, giving residential users temperature control from 3°C to 42°C without permanent plumbing.

Best for: individual home recovery, compact courtyards and buyers who want cold and hot capability without purchasing two separate products.

Why choose the Ember?
  • Cold and hot in one: set the water between 3°C and 42°C through the reverse-cycle system.
  • Comfortable immersion: the 65cm internal depth supports an upright, relaxed position.
  • Premium construction: Western Red Cedar surrounds an insulated 316 marine-grade stainless-steel bath.
  • Lower-maintenance water care: an integrated ozonator and particle filter support regular filtration.
  • Remote control: adjust settings and schedules through the Wi-Fi-enabled mobile app.
What is included?
  • NUVIE Ember bath
  • New-generation 1HP heating and cooling chiller
  • Hydro-Crystal Ozonator™
  • Precision Particle Filter plus 2 replacement filters
  • Insulated weather-shield bath cover
  • Required connection hoses and fittings supplied with the system
Specifications
Product specifications
Water temperature setting 3°C–42°C; actual performance depends on ambient conditions and use
Inner bath Insulated 316 marine-grade stainless steel
Exterior Western Red Cedar with stainless steel hoops and fasteners
Cover Insulated polyester cover
Electrical supply 220–240 V; standard 10 A plug
Control and water treatment WiFi app control, particle filtration and ozone system
Tub dimensions (L × W × H) 135 × 65 × 78 cm
Interior (L × W × H) 126 × 56 × 65 cm
Tub weight 80 kg
Chiller dimensions (L × W × H) 62 × 47 × 45 cm
Chiller weight 30 kg
Water volume 420 L total; approximately 270 L usable
Simple installation, clear planning

The system does not require permanent plumbing. Fill it manually with a hose and use the built-in drainage system when required. Place the bath on a flat, stable, load-bearing surface and allow space for the separate chiller, hoses, ventilation and service access. For outdoor installations, keep the chiller protected from direct weather exposure.

Availability: Confirm your selected configuration and delivery timing with NORD SAUNAS before ordering.

Confirm it suits your space

Call 1800 800 221 or request expert advice. We will check access, placement, power, drainage and delivery requirements before you commit.

Placement, water care and warranty conditions

Keep the chiller fully protected from rain and other weather, with unobstructed ventilation. Maintain sealed timber finishes, balanced water chemistry, clean filters and clear air intakes. Use a stable, level base rated for the filled tub and occupants. Filtration and ozone do not replace water testing, cleaning and the prescribed sanitising routine. Follow the manual’s electrical requirements; the warranty excludes extension cords, timers and non-approved surge protectors.

Manufacturer warranty

Residential: tub 3 years; chiller internal components and plumbing components 2 years; labour 1 year. Commercial or shared use: tub and chiller internal components 1 year; plumbing components and labour 6 months. These manufacturer warranties are additional to your rights under Australian Consumer Law. Contact NORD SAUNAS with your order number, serial number and photos for help with a claim.

Frequently Asked Questions

Do I need an electrician to install a sauna?

Yes — all electric saunas require a dedicated hardwired circuit installed by a licensed electrician. You will need a minimum 32A circuit breaker (we recommend 40A) with an RCD safety switch. This is a straightforward job for any qualified sparky and typically takes 2–3 hours. We will send you the full electrical specifications sheet before delivery so you can brief your electrician in advance.

How long does delivery take?

Delivery timeframes vary by product and your location. Australian metro areas typically receive delivery within 3–10 business days from order confirmation. Regional and rural areas may take longer. Your estimated arrival date is shown on the product page and confirmed in your order confirmation email. We will send you tracking information as soon as your order ships.

How is it delivered?

Your sauna or cold plunge is delivered by a professional freight carrier directly from the supplier's Australian warehouse. Delivery is to your kerb or garage — it does not include carry-in, assembly, or installation. We recommend having 2–3 people available on delivery day to assist with moving the flat-pack components to your installation location.

What base does it need — concrete, pavers, or a deck?

Your sauna needs a firm, level, waterproof base. Concrete slabs, pavers on compacted base, and structurally sound elevated timber decks all work well. The base must be perfectly level — even a slight slope affects door alignment and long-term structural integrity. We recommend checking with a builder or landscaper if you are unsure about your surface before ordering.

Do you offer installation services?

Professional assembly can be arranged for many of our products and delivery locations through our supplier and installer network. Availability and pricing depend on the selected model, postcode, site access, base preparation and installation conditions.

NORD SAUNAS can coordinate product selection, technical documentation, delivery and, where available, professional assembly. Licensed electrical, plumbing and site-preparation work must be completed separately by appropriately qualified local trades.

Contact us with your postcode and photographs of the proposed location for a delivered and assembled project quotation.

What is your return policy?

Due to the size and nature of these products, returns are assessed case by case. If a product arrives damaged or is not as described, we will work with you and the supplier to arrange a replacement or resolution at no cost to you. For change of mind returns, please contact us within 7 days of delivery. Return freight costs apply and products must be unassembled and in original packaging.